Category: News

Posted on by

AdBlue Emulator product line warranty terms changed

Volvo FH4 EURO 6 AdBlue emulator

AdBlue Emulator product line is our bestseller, but we noticed that quite a lot of customers just ignores our recommendations. In the past few months, we received a substantial amount of burned devices for repair and several flooded units. In response to this situation and to protect our customers who follow the installation instructions we have decided to change the terms of the warranty.

The most popular AdBlue Emulator product line products like V4 and V5 shipped with stickers. These labels indicate the state of the program, precisely which program is active and for what brand of the truck emulator is prepared. Also, there is a name of the device, pinout explanation, and the most important thing is the warning related to installation process – “Attention! Connect ground cable (brown) first!”.

AdBlue Emulator V4 and V5 connection

Why it’s so important? That’s because emulators are sensitive electronic devices. They designed in that way so they can’t do any damage to your truck, but they are vulnerable. By failing to follow the installation instructions you can burn the emulator. And the most dangerous what you can do is to ignore the main rule, to connect ground wire first.

To be more accurate, we can identify which emulator burned due to the incorrect installation procedure. You must keep in mind that brown wire must be connected first even when you’re connecting it to the V4 emulator programmer (V4 emulators).

Warranty terms changed

AdBlue EmulatorSo from now, we started to ship all AdBlue Emulator V4 and V5 units with an additional red label to pay your attention to the importance of the ground wire connection. It must be connected firmly, and you must connect the ground wire first when installing the emulator and disconnect it last when you need to disconnect the emulator.

We will not accept burned emulators for warranty service. Also, we need to remind you to put emulators in the dry area on the truck when installing. Flooded devices also lose their warranty. We do not cover back shipping costs for devices sent to us and not accepted by our warranty service specialists.

All necessary AdBlue Emulator installation instructions are available on our website. For more information, please contact us.

Posted on by

AdBlue Emulator price update for bulk kits

AdBlue Emulators

AdBlue Emulator price for bulk kits reduced. Now all bulk kits of emulators available for a smaller price. Just to remind you, we have a ten, twenty and fifty unit bulk kits. Every type of kit has three different options. They are available as kits of V5, V4, and V4 (with Volvo plug) emulators. We offer only one type of emulators per kit and it’s not possible to mix up emulator types in one kit.

AdBlue Emulator types

  • AdBlue Emulator V5 – this emulator is compatible with trucks and buses made by DAF, FORD, Iveco, MAN, Mercedes-Benz (only a few models, please contact for more information), Renault, Scania and Volvo.
  • AdBlue Emulator V4 – this emulator supports trucks and buses made by DAF (it also support DAF LF series with Grundfos SCR system), MAN, Iveco, Renault, Scania and Volvo.
  • AdBlue Emulator V4 (with Volvo plug) – it’s the same emulator as V4, but it has a genuine Volvo connector for direct connection and easy plug and play installation.

Continue reading AdBlue Emulator price update for bulk kits

Posted on by

AdBlue Emulator V4 and V5 models on sale!

AdBlue Emulator product series V4 NOx and V5 NOx are the most popular. We have reduced prices for these products several times last year. Now it’s time to reduce the price again. We’re glad to announce that AdBlue Emulator V4 NOx emulators now available just for 69.99 EUR (version for Volvo with direct connection plug costs a little bit more). AdBlue Emulator V5 NOx now available just for 39.99 EUR. By the way, there is sale available for emulator bulk kits.

Just to remind you, V4 emulator series supports EURO 5 trucks made by DAF, Iveco, MAN, Renault, Volvo. V4 is the only AdBlue Emulator on the market which fully supports DAF LF (Grundfos) trucks. V5 emulators compatible with EURO 5 trucks made by DAF, MAN, FORD, Iveco, Volvo, Renault, and Scania. Easy to install, safe to use, saves a lot of money. An ideal solution to override onboard SCR systems on supported trucks.

These emulators designed and manufactured in the European Union so there is no doubt about their quality and reliability (just don’t forget to install them properly in a dry area of your truck). Moreover, we’re shipping them from EU and you can get them next working day (DHL Express shipping service with a next day delivery to any EU country). Continue reading AdBlue Emulator V4 and V5 models on sale!

Posted on by

Scania VCI 2 stock restored, more additional software available

Scania VCI 2

Scania VCI 2 again available in our shop. Now it comes with the latest Scania SDP3 2.30 software (Scania Diagnosis and Programmer 3) version with all three access levels (High, Industry and Marine, Internal). SDP3 High Level used for Scania R, P, G, T, K, N series (buses, trucks) over the 2004 year. Industry and Marine SDP3 level used for industrial and marine engines. Internal Level used by developers for Scania R, P, G, T, K, N series (buses, trucks) over the 2004 year. VCI 2 is the most popular diagnostic scanner for Scania trucks, buses, and engines.

Also, we offer additional software to expand the capabilities of Scania VCI 2. We have Scania XCOM, Scania Multi, Scania SOPS file encryptor/decryptor on the stock. You can purchase VCI 2 with a kit of any software combination. For more information, please contact us.

Scania VCI 2 related products

Posted on by

DiagProg 4 FULL spring sale (last unit left on stock)!

Diagprog 4 updates

DiagProg 4 spring sale is over, but we have one set left in our stock. It is available just for 6999 EUR and it’s way cheaper than normally. So this price is available just for one set. DP4 diagnostic tool designed to support a broad range of vehicles. This tool is a replacement for the discontinued DP3 device. It is capable of reading and erasing OBD DTC codes, reset the engine oil inspections, delete accident data, change the interface language of internal vehicle systems. But its primary function which makes this tool so handy is the capability to test and program car dashboards and odometers for mileage correction. This tool is a real professional tool and must be used only by qualified specialists. Also, you need to keep in mind the laws related to the odometer data correction in your country. For more information please contact us directly.

Diagprog 4 product

Posted on by

Enigma Tool full package spring sale

Enigma Tool

Enigma Tool full package is on sale, and that’s good news. The bad news is that we have only two units available in our stock. So here’s the deal. Enigma Tool with the full set of latest software and hardware is now available just for 5699 EUR. You’ll get a full suite of software and hardware that was available on the day of purchase. Cardiag Inc. is the official distributor of Enigma products (tool, adapters and software updates).

Just to remind you, it is the most powerful and popular device for odometer correction and programming. It has the widest range of supported vehicles and is continuously updateable. Updates are not just for software, but hardware updates too, like new adapters. Updates may be free and premium. For more information about the device and its updates, please contact us directly. You can check the update history here → Enigma Tool updates. You can expect software update release approximately one time per month. And of course, this tool is known for its updates because you can get software that is compatible with brand new vehicles released a month or so ago. Continue reading Enigma Tool full package spring sale

Posted on by — 1 Comment

Up to 20% Easter discounts for AdBlue Emulator bulk kits

Easter Discount

Easter is coming soon, and we have an excellent offer for you. Three discount coupons of 10, 15 and 20 percent discount (discount coupons valid till 30.04.2017). These coupons are for all three AdBlue Emulator bulk kit products. We have bulk options of 10, 20 and 50 units per package. Kits can contain selected type of emulators, and there are three options – V4 emulators, V4 emulators (with Volvo plug for fast connection) and finally V5 emulators.

AdBlue Emulator kit discounts and coupon codes

  • Emulator kit 10x available with -10% discount. To get it, please use the coupon code “easter10” (you can enter the coupon in your shopping cart).
  • Emulator kit 20x available with -15% discount. To get it, please use the coupon code “easter15” (you can enter the coupon in your shopping cart).
  • Emulator kit 50x available with -20% discount. To get it, please use the coupon code “easter20” (you can enter the coupon in your shopping cart).

Each coupon is associated with a particular product and can’t be used with other products. If you need any assistance, please contact us directly. And for now – Happy Easter! Continue reading Up to 20% Easter discounts for AdBlue Emulator bulk kits

Posted on by

AdBlue Emulator discounts and other April news

AdBlue Emulators

As always we have some good news for our customers. April just started, and we have already made some discounts and added a new product, but first things first.

Adblue Emulator stock and shipping

We have restored our stock of all types of AdBlue Emulators. Now you can get any emulator or emulator kit without any shipping delay. So basically if you’re from the European Union you’ll get your goods on the next working day. Guys from the other countries can expect fast delivery depending on location as we ship our products by DHL Express shipping service from Europe.

Scania EURO 6 AdBlue Emulator and Scania R730

Attention to all clients who needs AdBlue Emulator for Scania R730. As you know, we have a dedicated AdBlue Emulator for this type of Scania trucks, but it is compatible with Scania R730 EURO 5. Now we have a solution for Scania R730 EURO 6 vehicles. From now it is supported by our Scania EURO 6 AdBlue Emulator. So if you need an emulator for Scania R730 EURO 6 version, we have a suitable product for you.

Iveco EURO 6 AdBlue Emulator discounted

Since the introduction of our EURO 6 emulator product line, we have made discounts for several times. Now we are glad to announce that we have dropped prices for both Iveco EURO 6 AdBlue Emulator products. From now EURO 6 AdBlue Emulator for Iveco Eurocargo type vehicles cost just 299 EUR per unit, and EURO 6 AdBlue Emulator for Iveco Stralis (this emulator comes with the additional adapter for faster connection) model vehicles costs just 349 EUR.

Scania SDP3 version 2.30 and easier way to buy updates

Another one Scania SDP3 software update released and now available in our shop. Scania SDP3 version 2.30 is the latest version, and it’s highly recommended you to update it. Also, we have made a separate product in our shop for those clients who just want to purchase Scania SDP3 updates. Keep in mind that you must have a proper USB HASP license key if you need to use Scania SDP3 software. For more information, please check out the product description. Continue reading AdBlue Emulator discounts and other April news