Tag: Renault

Posted on by

SCR Emulator V5 again on stock!

AdBlue Emulators

SCR Emulator V5 product line stock restored and we are glad to say that we will ship all orders without any delay. All pre-orders already shipped. Large kits of ten, twenty, fifty and one hundred V5 emulator units also available. We want to remind you that all our emulators developed and manufactured in Europe. Also, we provide next day delivery to the European Union countries and slightly longer worldwide shipping (shipping delivery time depends on how distant your shipping address is from the major cities in your country).

SCR Emulator V5 modules are compatible with EURO 5 trucks made by DAF, MAN, Iveco, FORD, Mercedes-Benz, Renault, Volvo, and Scania. Capable of overriding whole SCR system and NOx sensor. Easy to install, doesn’t require additional programming (if pre-programmed to the truck type that you need). All installation instructions and other documentation available on our website. If you need more information about this product then, please contact us directly. Continue reading SCR Emulator V5 again on stock!

Posted on by

Diagprog 4 software updates – 2017 June

Diagprog 4 updates

Diagprog 4 software updates released on 2017 June. This list includes premium and free software updates. Also, it includes new software fixes. For more information please contact us directly.

Diagprog 4 updates (2017 June)

  • Mitsubishi Outlander III NS with D70F3421 (Mono) and D70F3425 (Color) – programming via OBDII
  • Smart ForTwo W453 ESP Bosch 95640, 95128 – via OBDII
  • Smart ForTwo W453 full TFT (D70F3536) – new programming only via OBDII
  • GM Cadillac Escalade (2014-2015) – programming via OBDII
  • Fiat Mobi (2017) Magneti Marelli – programming via OBDII
  • Lincoln Navigator, MKZ (2015-2016) SPC5606S (Denso) – programming via OBDII
  • Lexus RX (2017) 93C86 NS – programming
  • FORD F250 (2017) with 4″ TFT and MB91F038 + YGV639 (Denso) – programming via OBDII
  • FORD F450 (2017) with 4″ TFT and MB91F038 + YGV639 (Denso) – programming via OBDII
  • Renault Zoe ESP – programming via OBDII
  • Renault Megane IV – programming via OBDII
  • Renault Talisman – programming via OBDII
  • Hummer H3 BCM – programming via OBDII
  • Chevrolet Colorado BCM – programming via OBDII
  • Suzuki Swift (2016) D70F352? – programming via OBDII

Continue reading Diagprog 4 software updates – 2017 June

Posted on by

Diagprog 4 software updates – 2017 May

Diagprog 4 updates

Diagprog 4 software updates released on 2017 May. This list includes premium and free software updates. Also, it includes new software fixes. For more information please contact us directly.

Diagprog 4 updates (2017 May)

  • VW Beetle UDS (2015-2016) D70F3427 + 95320
  • VW Up (2015-2016) D70F3427 + 95320
  • Mitsubishi Delica D5 2.2DID 4N14 ECM DENSO20120
  • Mitsubishi Outlander 2.2DID 4N14 ECM DENSO20120
  • Mitsubishi Pajero (2009) 3.2DID 4M41 ECM DENSO20120
  • Mitsubishi L200 (2009) 2.5DID 4D56 ECM DENSO20120
  • Mitsubishi ASX (2009) 1.8DID 4N13 ECM DENSO20120
  • Subaru Forester III,IV 2.0D ECM DENSO20110
  • Honda HRV (2016-2017) MB91F062BS
  • Maserati Ghibli
  • Maserati Quattroporte (2015)
  • Porsche Spyder 918
  • Honda City (2015-2016) MB91F061BS
  • Honda Fit (2015-2016) MB91F061BS
  • Honda HRV (2015-2016) MB91F061BS
  • Honda Jazz (2015-2016) MB91F061BS
  • Dacia (2013-2017) ESP Bosch 95640, 95128
  • Suzuki Jimny MB91F061BS
  • Renault Scenic IV
  • FIAT Uno Way (2017) Magneti Marelli
  • PSA BSI UDS Valeo
  • Renault Scenic II
  • Mazda 2 (2004-2009) 93C56, 93C66
  • Mazda 3 (2004-2009) 93C56, 93C66
  • Mazda 5 (2004-2009) 93C56, 93C66
  • Mazda 6 (2004-2009) 93C56, 93C66
  • Mazda RX8 (2004-2009) 93C56, 93C66
  • Mazda MX5 (2004-2009) 93C56, 93C66
  • Mazda CX7 (2004-2009) 93C56, 93C66
  • Mazda CX9 (2004-2009) 93C56, 93C66
  • FIAT 500X (2016) Magneti Marelli
  • Honda (2015-2016) MB91F061BS

Continue reading Diagprog 4 software updates – 2017 May

Posted on by

EURO 6 DTC Error Code Eraser modules on stock!

EURO 6 DTC Error Code Eraser

EURO 6 DTC Error Code Eraser modules now available on our online store. It’s a brand new product, and we think it might be quite popular. The primary function of EURO 6 DTC Error Code Eraser is to delete all DTC (Diagnostic Trouble Code) errors from supported EURO 6 truck ECU (Electronic Control Unit) by OBD (On-Board Diagnostics). We have seven types of these erasers and each of the supports one predefined vehicle manufacturer.

EURO 6 DTC Error Code Eraser supports EURO 6 trucks made by DAF, MAN, Iveco, Scania, Mercedes-Benz, Renault, and Volvo. It’s easy to use because every module has OBD connector for direct connection. Moreover, you don’t need any special knowledge to use this tool, and it’s safe to use as it can’t alter ECU parameters or firmware, it just cleans out DTC errors. Eraser is a quite handy tool if you are trying to repair some problems that throw OBD DTC error codes. Cheapest solution, no need for expensive diagnostic scanners that requires specialized knowledge and PC. Just 199 EUR per unit, ultra mobile, ready to use and works instantly.

EURO 6 DTC Error Code Eraser versions

  • DTC eraser with OBD connector for DAF XF 106, DAF CF (2014-).
  • DTC eraser with OBD connector for Iveco Stralis, HI-WAY, Eurocargo (2014-).
  • DTC eraser with OBD connector for MAN TGX, TGS, TGL (2014-).
  • DTC eraser with OBD connector for Scania R, P, T, G (2004-).
  • DTC eraser with OBD connector for Mercedes Actros MP IV, Antos, Atego (2011-).
  • DTC eraser with OBD connector for Renault T, K, C, D (2014-).
  • DTC eraser with OBD connector for Volvo FH(4), FM(4), FH16(4), FL, FE (2014-).

By the way, we recommend to clean up all DTC errors before installation of AdBlue Emulator. The tool is safe to use even with AdBlue Emulator installed on the truck. Continue reading EURO 6 DTC Error Code Eraser modules on stock!

Posted on by

Diagprog 4 software updates – 2017 April

Diagprog 4 updates

Diagprog 4 software updates released on 2017 April. This list includes premium and free software updates. Also, it includes new software fixes. For more information please contact us directly.

  • Renault Megane IV – via OBD2
  • Renault Talisman – via OBD2
  • Ford F350 (2013-2015) with 4″ TFT and MB91F038 + YGV639 (Denso) – via OBDII
  • FIAT Magneti Marelli ECM’s – MJD 8F2, MJD 8F3 – OBDII programming
  • Volvo V40 (2016) – OBD2 programming
  • Volvo V60 (2016) – OBD2 programming
  • Volvo S60 (2016) – OBD2 programming
  • Volvo XC60 (2016) – OBD2 programming
  • Volvo XC70 (2016) – OBD2 programming
  • Maserati Ghibli (2015) – via OBD2
  • Maserati Quattroporte (2015) – via OBD2
  • Ford Mondeo MK5 Continental – OBD2 programming

Continue reading Diagprog 4 software updates – 2017 April

Posted on by

Enigma Tool – 3.36

Enigma Tool

It’s the latest software update (released on 2017.04.08) for Enigma Tool device. Some of these updates are free, and some of them are premium. Also, you need to know that some of these updates require earlier versions of premium upgrades. Please contact us if you want more information about this Enigma Tool update or if you want to purchase it. If you need software update price calculation by email or phone, please do not forget to specify a serial number of your Enigma device.

Enigma Tool update 3.36

  • Renault Scenic II OBD2
  • Mazda 2 2016- 93C86 OBD2
  • Scion IA 2016- 93C86 OBD2
  • FORD Mondeo Fusion 2015- OBD2
  • SPC5606S + 93C86 + MB86R03 DENSO 2x LCD
  • Ducati Scrambler 24C16
  • Direct programming with checksum calculation
  • Honda Forza 300 2016 93C66

Continue reading Enigma Tool – 3.36

Posted on by

Diagprog 4 software updates – 2017 March

Diagprog 4 updates

Diagprog 4 software updates released on 2017 March. This list includes premium and free software updates. Also, it includes new software fixes. For more information please contact us directly.

  • Renault Kadjar – ESP Bosch 95640, 95128 – via OBD2
  • Renault Espace V – ESP Bosch 95640, 95128 – via OBD2
  • Subaru Outback (2016) D70F3529 – OBD2 programming
  • Subaru Legacy (2016) D70F3529 – OBD2 programming
  • Suzuki Swift (2016) D70F352# – OBD2 programming
  • Ford Mustang (2014-2016) SPC5606S (Denso) – OBD2 programming
  • Opel Meriva B (2016) Delphi D70F3634 – OBD2 programming
  • Honda Fit (2016-2017) MB91F060BS – new flash files added to server database
  • Honda HRV (2016-2017) MB91F060BS – new flash files added to server database
  • Honda Jazz (2016-2017) MB91F060BS – new flash files added to server database
  • Honda Vezel Hybrid (2016-2017) MB91F060BS – new flash files added to server database
  • PSA BSI Johnson Controls (KWP2000) – new flash files added to server database

Continue reading Diagprog 4 software updates – 2017 March

Posted on by

Enigma Tool – 3.35

Enigma Tool

It’s the latest software update (released on 2017.03.02) for Enigma Tool device. Some of these updates are free, and some of them are premium. Also, you need to know that some of these updates require earlier versions of premium upgrades. Please contact us if you want more information about this Enigma Tool update or if you want to purchase it. If you need software update price calculation by email or phone, please do not forget to specify a serial number of your Enigma device.

Enigma Tool update 3.35

  • Mitsubishi ASX (2015-) UPD70F3529 EEPROMLESS OBD2
  • Mitsubishi Outlander (2015-) UPD70F3529 EEPROMLESS OBD2
  • Jaguar XF 24C64 OBD2
  • Hyundai Genesis (2016-) UPD70F3523 OBD2
  • Dacia Doker ABS 95320 new software
  • FIAT 500 95160 Crypto direct EEP
  • Honda Innova 93C46
  • Isuzu Sumo 93C86
  • Mahindra Scorpio 24C16
  • Dodge RAM moto hours fix
  • Renault Traffic 9S12HY256 direct fix

Continue reading Enigma Tool – 3.35